Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge - Discontinued
PLEASE NOTE: THIS PRODUCT HAS BEEN DISCONTINUED – Please contact us if you would like a recommendation of a unit to replace this model.
Product Description
| The Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge is ideal for the NDT inspection of pipes, storage tanks and other metal structures. The Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gaugefeatures both Pulse-Echo (PE) and Echo-Echo mode (EE) ThruPaint™ technology. Offering all the features and benefits of the Elcometer NDT CG50 Corrosion Ultrasonic Thickness Gauge, the Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge range of handheld ultrasonic gauges are designed to ignore the coating thickness giving a true material thickness value.Designed to ignore applied coatings up to 2mm thick on metal substrates, the CG60 is ideal for identifying internal corrosion of a coated sample. The Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge also offers high speed scanning, taking 16 readings per second, making quick scanned passes over the test material. With the lowest thickness value held in memory and displayed when the scanning is complete.Once a user defined nominal thickness value is set the differential mode will display the +/- thickness difference from the nominal value entered.The built-in minimal thickness alarm mode illuminates a red LED and an audible alarm sounds when a measurement falls below the user defined target value. Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge Advantages
|
Specifications
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge – Specifications
| Model & Part Number | CG60 | |
| Material thickness digits display | • | |
| Measurement Mode | PE & EE (ThruPaint™) | |
| Measurement Rate : | Manual: | 4 readings per second |
| Scan Mode: | 16 readings per second | |
| Measurement Range | PE: 0.63 – 500mm, EE: 2.54 – 25.4mm | |
| Measurement Accuracy | ±0.1mm | |
| Measurement Resolution | 0.01mm | |
| Velocity Calibration Range | 1250 – 10,000m/s | |
| Additional Features: | ||
| High Speed scan mode | • | |
| Differential mode | • | |
| Minimum thickness alarm mode | • | |
| Calibration Options | single, two point & velocity | |
| Transducer Probe Type | dual element | |
| Transducer Frequency Range | 1 – 10MHz | |
| V-path / dual path error correction | automatic | |
| Probe zero | manual (via integrated probe disk) | |
| Display | 12.7mm high digits | |
| Units (selectable) | mm or inches | |
| LED Backlight | on / off / auto | |
| Repeatability / Stability Indicator | • | |
| Battery Type | 2 x AA alkaline | |
| Battery Life (approximate) | 200 hours | |
| Low Battery Indicator | • | |
| Battery Save Mode | auto | |
| Operating Temperature | -30 to 50ºC | |
| Size (w x h x d) | 63.5 x 114.3 x 31.5mm | |
| Weight (including batteries) | 284g | |
| Aluminium case design | • | |
| with gasket sealed end caps, | ||
| waterproof membrane keypad | ||
| Transducer Connector Type | LEMO | |
| RS232 Interface | • | |
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge Packing List:
- Elcometer NDT CG60Corrosion Ultrasonic Thickness Gauge
- Couplant
- Carry case
- User manual
- Test certificate
- 2 x AA batteries
Data Sheet
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge – Data Sheet
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge Data Sheet
Instruction Manual
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge – Instruction manual
Elcometer NDT CG60 Corrosion Ultrasonic Thickness Gauge Instruction Manual
