Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge - Discontinued
PLEASE NOTE: THIS PRODUCT HAS BEEN DISCONTINUED – Please contact us if you would like a recommendation of a unit to replace this model.
Product Description
The Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge is an easy to use, versatile gauge, quickly calibrated on site by the user to give reliable, accurate thickness measurements on a wide variety of material substrates. Taking 16 readings per second the high speed scan mode allows the user to quickly scan an area of material for defects or to identify its thinnest point, ideal for pipelines or large test surfaces. Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge Advantages
|
Specifications
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge – Specifications
| Model & Part Number | CG30 | |
| Material thickness digits display | • | |
| Measurement Mode | PE | |
| Measurement Rate : | Manual: | 4 readings per second |
| Scan Mode: | 16 readings per second | |
| Measuring Range | 0.63 – 500mm | |
| Measurement Accuracy | ±0.01mm | |
| Measurement Resolution | 0.01mm | |
| Velocity Calibration Range | 1250 – 10,000m/s | |
| Additional Features: | ||
| High Speed scan mode | • | |
| Calibration Options | single, two point & velocity | |
| Transducer Probe Type | dual element | |
| Transducer Frequency Range | 1 – 10MHz | |
| V-path / dual path error correction | automatic | |
| Probe zero | manual (via integrated probe disk) | |
| Display | 12.7mm (0.5 inch) high digits | |
| Units (selectable) | mm or inches | |
| LED Backlight | on / off / auto | |
| Repeatability / Stability Indicator | • | |
| Battery Type | 2 x AA alkaline | |
| Battery Life (approximate) | 200 hours | |
| Low Battery Indicator | • | |
| Battery Save Mode | auto | |
| Operating Temperature | -30 to 50ºC | |
| Size (w x h x d) | 63.5 x 114.3 x 31.5mm | |
| Weight (including batteries) | 284g | |
| Aluminium case design | • | |
| with gasket sealed end caps, | ||
| waterproof membrane keypad | ||
| Transducer Connector Type | LEMO | |
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge Packing List:
- Elcometer NDT CG30Corrosion Ultrasonic Thickness Gauge
- Couplant
- Carry case
- User manual
- Test certificate
- 2 x AA batteries
Data Sheet
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge – Data Sheet
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge Data Sheet
Instruction Manual
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge – Instruction Manual
Elcometer NDT CG30 Corrosion Ultrasonic Thickness Gauge Instruction Manual
