Subsite 150 Pipe and Cable Locating System – Discontinued

Subsite 150 Pipe and Cable Locating System - Discontinued

Product Description

PLEASE NOTE: THIS PRODUCT HAS BEEN DISCONTINUED – Please contact us if you would like a recommendation of a unit to replace this model.

The Subsite 150 pipe and cable locator / Location System is an easy, affordable way to see what obstacles lie beneath the surface of your next jobsite, so you can dig a post hole or footing, install a french drain or fiber optic cable with confidence.

Features

With only four buttons and an easy to-read display, the 150R receiver is simple to operate. All locating information is at your fingertips. Rugged, rain-resistant housings stand up to extreme jobsite conditions.
System comes in a convenient carrying bag you can take anywhere.
Pre-bundled packages and color coded components make the 150R/T system easy to buy—just pick your frequency at the time of purchase.
Optional beacons round out the package so you can trace water, sewer, or drain lines with ease.
With the entire system weighing just over 2.3 kg, the 150R/T is lightweight, compact, and easy on operators.
For added convenience, both the 150R receiver & the 150T transmitter operate using C-cell alkaline batteries.
Every 150R/T locating system is backed by superior quality service and support.

Specifications

Subsite 150 Pipe and Cable Locating System – low cost – Specifications

Dimensions	Receiver	Transmitter
Length	305 mm	305 mm
Height	60 mm	87 mm
Width	110 mm	159 mm
Weight	0.91 kg	1.36 kg

Operation
Operating Temp. Range	-20° C to 50° C
Antenna Configurations	Peak, null
Audio Output	Speaker
Operating Modes :	Active Line	30 KHz, 83 kHz

Recommended Depth Ranges
640 Beacon in air	3.66 m
640 Beacon in cast iron	1.83 m
30K Beacon in air	3.66 m
30K Active (direct connect)	4.57 m
83K Active (direct connect)	4.57 m

Beacons
Dimensions	640 WS	30K Conduit	640 Conduit
Length	56 mm	91 mm	91 mm
Flex Rod	1/4-20unc	1/4-20unc	1/4-20unc
Diameter	19 mm	19 mm	19 mm
Weight	52.73 g	65.2 g	65.2 g

Data Sheet

Subsite 150 Pipe and Cable Locating System – Data Sheet

Subsite 150 Pipe and Cable Locating System Data Sheet

Instruction Manual

Subsite 150 Pipe and Cable Locating System – Instruction Manual

Subsite 150 Pipe and Cable Locating System Instruction Manual

Comparison Table

			Subsite 150	Subsite 250	Subsite 950

Receiver			Y	Y	Y
Power Mode		1	Y	Y	Y
	Live Cable Locator without Transmitter
	Passive Power Frequency				50P,100Hz
Radio mode		2		Y	Y
	Detects Metallic Pipes without Transmitter (no Current)	3
Depth Range
	Line		+/-2m	4.2m	5m
	Beacon		+/-2m	3m	3m
Push button depth indication				Y	Y
Depth by Triangulation			Y	Y	Y

Optional Accessories

Transmitter			Y	Y	Y
Active mode		4	Y	Y	Y
	Active Line Frequencies	5	30k Hz, 640 Hz	33 kHz	512 Hz, 1 kHz, 8 kHz, 29 kHz, 80 kHz, 33 kHz (EML)
Beacon / Sonde
Beacon mode		6	Y	Y	Y
	Ranges of Beacons available		30kHz, 640Hz	33kHz	640, 512, 33kHz, 29kHz


Note :
1	Power mode is used to locate all live cables with sufficient current flow
2	Radio mode is used to locate any metallic service carrying a (VLF) very low frequency signal
	The 250 has a specifically strong radio mode signal which makes it a very popular model
3	If the Metallic Pipe has a Current then the 150 can detect it in Power Passive mode
4	Active mode is used in conjunction with the Transmitter to locate and trace a specific service.
	The Transmitter is an Optional Accessory
5	The 950 has a large range of Transmitter frequencies which is used when cables are congested and there is a chance of “bleeding” i.e. current jumping from one cable to another
6	Beacon Mode is used for Non Metallic pipes where you create a signal by inserting the beacon / sonde into the non-metallic pipe e.g asbestos, PVC or plastic The beacon is an optional accessory and needs to be purchased separately

Subsite 150 Pipe & Cable Locating System
Subsite 250 Pipe & Cable Locating System
Subsite 950 Pipe & Cable Locating System